Bog plant pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pitcher and Bog Plant Pot Plant pot for pitcher and other bog plants which like to stand in an inch of water. A one…
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 866
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Pitcher and Bog Plant Pot
Plant pot for pitcher and other bog plants which like to stand in an inch of water. A one piece design of pot and water tray. It is best to spray-paint your pot as it may leak between the print layers.
This is a large print 255mm x 155mm x 170mm high but should scale successfully to other sizes.
The corrugated design is to reduce warping and cracking in ABS but I recommend that you use PLA or PETG which has better layer adhesion and reduced warping.
Print Settings
Rafts:
No
Supports:
No
0.25 layer height
Infill:
25%
Filament:
. PLA or PETG
Notes:
Bog plants generally do not like sunny window ledges but if you are going to put this in the sun then use a white filament to stop it getting too hot and cooking your plant..
Category: Outdoor & Garden