Bog plant pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pitcher and Bog Plant Pot Plant pot for pitcher and other bog plants which like to stand in an inch of water. A one…
- Rating
- 4 / 5
- Likes
- 29
- Downloads
- 121
- Makes
- 1
- Views
- 866
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Pitcher and Bog Plant Pot
Plant pot for pitcher and other bog plants which like to stand in an inch of water. A one piece design of pot and water tray. It is best to spray-paint your pot as it may leak between the print layers.
This is a large print 255mm x 155mm x 170mm high but should scale successfully to other sizes.
The corrugated design is to reduce warping and cracking in ABS but I recommend that you use PLA or PETG which has better layer adhesion and reduced warping.
Print Settings
Rafts:
No
Supports:
No
0.25 layer height
Infill:
25%
Filament:
. PLA or PETG
Notes:
Bog plants generally do not like sunny window ledges but if you are going to put this in the sun then use a white filament to stop it getting too hot and cooking your plant..
Category: Outdoor & Garden