Ikea Metod kitchen plinth clips for using non-Ikea boards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With these plinth clips you can use plinths from other suppliers for your IKEA Metod kitchen. They have correct spacing.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 347
- Wydruki
- 2
- Wyświetlenia
- 1581
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
We needed our plinth to be higher than the standard 8 cm Ikea plinth. So we got a wooden plinth from another supplier. Only problem was that the clips that came with the Ikea plastic legs were sticking out 3-4 mm to far, so the plinth would not be supported by the leg base or the -ring.
So I was delighted to find this excellent design by mikeser, unfortunately it didn't fit our purpose, so I modified it in Tinkercad so that the distance from leg to plinth would be 9 mm
Use the groove to mount the plinth to the clip with 2 screws loosely so you can adjust sideways.
In the photos, I placed an original Ikea clip to compare.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
Use 4 walls
Category: Kitchen & Dining