1 / 2
Key for Oventrop AV 6 / ADV 9 radiator valves — zdjęcie 1
1 / 2

Key for Oventrop AV 6 / ADV 9 radiator valves

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A key for adjusting the flow setting of Oventrop AV 6 and ADV 9 radiator valves.

Ocena
5 / 5
Polubienia
8
Pobrania
62
Wydruki
1
Wyświetlenia
280
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A key for adjusting the flow/differential pressure setting of Oventrop AV 6 and ADV 9 type radiator valves. The valves exist in various styles and types. Some use heads made of metal and can be adjusted using pliers or a wrench. Others (possibly clones?) use plastic heads and are too soft to be adjusted with regular tools - that's where this design comes in.

This key is will not work for "bleeding" radiators. It is only meant to adjust the flow setting of valves!

Tolerances on the mating surfaces are quite tight to maximize grip. If it doesn't fit, you can try printing at 101.5% scale and/or reduce your outer wall flow to ~95%.

 

Print settings

  • Layer height 0.2 mm
  • Line width 0.42 mm
  • 4 wall lines
  • 5 top & 4 bottom layers
  • Supports not required

Approximate print time @ 60 mm/s: 0:30 h

Tagi