Key for Oventrop AV 6 / ADV 9 radiator valves
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A key for adjusting the flow setting of Oventrop AV 6 and ADV 9 radiator valves.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 62
- Makes
- 1
- Views
- 280
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A key for adjusting the flow/differential pressure setting of Oventrop AV 6 and ADV 9 type radiator valves. The valves exist in various styles and types. Some use heads made of metal and can be adjusted using pliers or a wrench. Others (possibly clones?) use plastic heads and are too soft to be adjusted with regular tools - that's where this design comes in.
This key is will not work for "bleeding" radiators. It is only meant to adjust the flow setting of valves!
Tolerances on the mating surfaces are quite tight to maximize grip. If it doesn't fit, you can try printing at 101.5% scale and/or reduce your outer wall flow to ~95%.
Print settings
- Layer height 0.2 mm
- Line width 0.42 mm
- 4 wall lines
- 5 top & 4 bottom layers
- Supports not required
Approximate print time @ 60 mm/s: 0:30 h