45mm Rotary Blade Thread Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thread Cutter to "recycle" old 45mm blades. Optionally uses cheap Dollar Tree rotary cutter hardware.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 219
- Wydruki
- 0
- Wyświetlenia
- 1483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for chain pieced fabric thread cutting, or thread cutting in general.
Reuse your old 45mm rotary cutter blades.
You can use the hardware (minus the blade! See my other design for that “mini” size) from a 28mm Rotary Cutter from Dollar Tree.
But, the front and back halves will friction fit pretty tight (on my printer at least,) so I'd say the hardware is probably optional. Could use a simple cheap bolt and nut instead.
These are weirdly expensive online, so I made my own design. This one's “petals” reminded me of whale/dolphin tails.
Case acts as a stand for the cutter. Held together with optional 6mmx2mm magnets.