1 / 4
Enclosure for esp32 webradio / Gehäuse für ESP32 Internetradio — zdjęcie 1
1 / 4

Enclosure for esp32 webradio / Gehäuse für ESP32 Internetradio

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

wider enclosure due to bigger battery for webradio from AZ-Delivery blog.

Ocena
5 / 5
Polubienia
15
Pobrania
124
Wydruki
0
Wyświetlenia
1273
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

https://www.az-delivery.de/blogs/azdelivery-blog-fur-arduino-und-raspberry-pi/internet-radio-mit-dem-esp32?_kx=sRfYoB9iNFS8Zy1KMoJo4iW-r4VDCdD6ykGkGz4V1sU%3D.QVRJMi&utm_campaign=250124_DIY-Internet-Radio%2BBlog_promo_Projekt_legitimate-interest-DE&utm_content=%F0%9F%91%89%20Hier%20gehts%20zum%20Blog%20%F0%9F%91%88&utm_id=01HMV3HENQAZ5EP6KK8YG1EDYH&utm_medium=email&utm_source=Legitimate-interest-90-days-engaged-DE&utm_term=Campaign

 

This is a modified enclosure for the radio. Its now 200mm wide for using a 3,7v 3700mAh LiPo battery. There are also thread-inserts for the speakers, the display, the batteryholder and for the esp32-perf board in M2 size and for the enclosure thread-inserts in M3 used.

0.4mm nozzle, 0.2mm layer height, 15% infill, PLA. Use a little support in the backcover for the usb connector.

There's a holder for a powerconnector (JST 2 x 2.54) in the backside right next to the boost converter.

Tagi