1 / 4
Skladací stojan na štetce (Folding brush stand). — zdjęcie 1
1 / 4

Skladací stojan na štetce (Folding brush stand).

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Skladací stojan na štetce. Folding brush stand.

Ocena
0 / 5
Polubienia
23
Pobrania
102
Wydruki
4
Wyświetlenia
568
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Stojan na odkladanie štetcov počas práce.

Tryska : 0.4

Výška vrstvy : 0.20

Výplň : 20% ( Pin.stl - 100%)

Niektoré objekty vyžadujú podpery.

Materiál : PLA

Bočné steny sú prepojené dvoma ramenami ( každé z nich je tvorené spojením Arm_1.stl a Arm_2.stl podľa obrázku). Pin.stl treba opatrne zasunúť ( ide ťažšie). Ak sa časom kĺbové spoje uvoľnia, je ich možné fixovať vzperou ( tvorenou spojením Strut_1.stl a Strut_2.stl) ako je to vidno na obrázku. Vzperu nie je potrebné lepiť k zvyšku objektu, stačí ju založiť.

 

Stand for storing brushes during work.

Nozzle: 0.4

Layer height: 0.20

Infill : 20% ( Pin.stl - 100%)

Some objects require supports.

Material: PLA

The side walls are connected by two arms (each of them is formed by the connection of Arm_1.stl and Arm_2.stl according to the picture). Pin.stl must be inserted carefully (It's going in harder). If the joints loosen over time, they can be fixed with a strut (formed by the connection Strut_1.stl and Strut_2.stl) as shown in the figure. There is no need to glue the strut to the rest of the object, just insert it.

 

Tagi