Skladací stojan na štetce (Folding brush stand).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Skladací stojan na štetce. Folding brush stand.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 102
- Makes
- 4
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stojan na odkladanie štetcov počas práce.
Tryska : 0.4
Výška vrstvy : 0.20
Výplň : 20% ( Pin.stl - 100%)
Niektoré objekty vyžadujú podpery.
Materiál : PLA
Bočné steny sú prepojené dvoma ramenami ( každé z nich je tvorené spojením Arm_1.stl a Arm_2.stl podľa obrázku). Pin.stl treba opatrne zasunúť ( ide ťažšie). Ak sa časom kĺbové spoje uvoľnia, je ich možné fixovať vzperou ( tvorenou spojením Strut_1.stl a Strut_2.stl) ako je to vidno na obrázku. Vzperu nie je potrebné lepiť k zvyšku objektu, stačí ju založiť.
Stand for storing brushes during work.
Nozzle: 0.4
Layer height: 0.20
Infill : 20% ( Pin.stl - 100%)
Some objects require supports.
Material: PLA
The side walls are connected by two arms (each of them is formed by the connection of Arm_1.stl and Arm_2.stl according to the picture). Pin.stl must be inserted carefully (It's going in harder). If the joints loosen over time, they can be fixed with a strut (formed by the connection Strut_1.stl and Strut_2.stl) as shown in the figure. There is no need to glue the strut to the rest of the object, just insert it.