1 / 3
Nullbits Keyboard Feet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for the Nullbits Nibble, Tidbit & Snap Keyboards. May work well with other models, mileage may vary!
- Ocena
- 3 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 396
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Some simple keyboard feet to get the job done - mix and match the different sizes and versions.
Example usage shown for a Snap 75% split keyboard in the photos: Each half of the keeb uses one wrap-around screen foot in the centre and two small wrap-behind feet to keep things stable when split.
Types:
- Small - Smaller version best suited for where there is less room.
- Large - Standard version well suited for the Nibble.
- Screen - Standard version with OLED display holder.
Versions:
- Flat - Best suited for sticking directly into place, works well on keyboards with a case or if anything is obstructing the other versions.
- Wrap-behind - Slightly more sturdy, raised section sits against the back edge of the PCB or case.
- Wrap-around / Clip-on - Most sturdy version, completely wraps around and over the PCB. Probably only works for the intended keyboard models due to the specific PCB thickness.
Designed for:
- Nibble 65%
- Snap 75%
- Tidbit Numpad