Worm Gear Drive - Print In Place Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Test the Print In Place skils of your 3D printer! ;-)
- Ocena
- 4 / 5
- Polubienia
- 47
- Pobrania
- 526
- Wydruki
- 4
- Wyświetlenia
- 1620
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
For printing, I set (in Cura) Standart Quality: Layer Height 0.2 mm, at least 4 wall lines, Infill: Triangles 20% and also need to use Support: Normal, Touching Buildplate to support the handle and the lower part of the worm wheel. On my Ender 3 Pro print speed 40 mm/s, temperatures 200/50°C (PLA Colorfil), 100% Cooling.
After the print was finished, it was necessary to carefully release the moving parts.
You can choose from two versions of the model:
worm_gear_print_test_0.4_0.4 v1.stl: 0.4 mm tolerance under the 18 tooth gear and 0.4 mm tolerance between the axles and their holes.
worm_gear_print_test_0.6_0.4 v1.stl: 0.4 mm tolerance under the 18 tooth gear and 0.6 mm tolerance between the axles and their holes.
Youtube: https://youtu.be/ATu4tPS0XOw