Worm Gear Drive - Print In Place Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Test the Print In Place skils of your 3D printer! ;-)
- Rating
- 4 / 5
- Likes
- 47
- Downloads
- 528
- Makes
- 4
- Views
- 1,625
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
For printing, I set (in Cura) Standart Quality: Layer Height 0.2 mm, at least 4 wall lines, Infill: Triangles 20% and also need to use Support: Normal, Touching Buildplate to support the handle and the lower part of the worm wheel. On my Ender 3 Pro print speed 40 mm/s, temperatures 200/50°C (PLA Colorfil), 100% Cooling.
After the print was finished, it was necessary to carefully release the moving parts.
You can choose from two versions of the model:
worm_gear_print_test_0.4_0.4 v1.stl: 0.4 mm tolerance under the 18 tooth gear and 0.4 mm tolerance between the axles and their holes.
worm_gear_print_test_0.6_0.4 v1.stl: 0.4 mm tolerance under the 18 tooth gear and 0.6 mm tolerance between the axles and their holes.
Youtube: https://youtu.be/ATu4tPS0XOw