on-target spinner target
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
box mount spinner target for disc shooter and others
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Rotary fan targets for disc shooters.
This on-target fixture was designed for the 6-Shot Disc Shooter by uhltimate but can be used with other things.
Between the spin of the discs and the motion of the spinners, these can deny you a win. They tend to work better when the spinner does not go to the edges of the frame.
A couple of horizontal and a vertical model available.
Printing
- These are thin wall fixtures.
- Good layer adhesion required
- designed for .4mm at 2mm layer.
- Frames print face down
- Remove the support material from the springs
- Print the provided pin
- The template may not be necessary but is available to make your cut.
- Print the cut template
- Print the spinner in the appropriate color.
CUTTING the box
Cutting holes could be dangerous. Use caution to avoid personal injury. Certain power tools may be facilitate cutting.
- For this one you will need the template.
- Cut on the lines. knock out the plug and insert the fixture.
Other models:
on-target bullseye door
on-target disc shooter hoop track
The box:
- 3-7mm thick is good.
- Less than 3mm you may need to place the templates in the back to make the space behind the clips closer.
Don't Forget Night Mode
Put a flashlight in the box and enjoy illuminated target