on-target spinner target
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
box mount spinner target for disc shooter and others
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 107
- Makes
- 0
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Rotary fan targets for disc shooters.
This on-target fixture was designed for the 6-Shot Disc Shooter by uhltimate but can be used with other things.
Between the spin of the discs and the motion of the spinners, these can deny you a win. They tend to work better when the spinner does not go to the edges of the frame.
A couple of horizontal and a vertical model available.
Printing
- These are thin wall fixtures.
- Good layer adhesion required
- designed for .4mm at 2mm layer.
- Frames print face down
- Remove the support material from the springs
- Print the provided pin
- The template may not be necessary but is available to make your cut.
- Print the cut template
- Print the spinner in the appropriate color.
CUTTING the box
Cutting holes could be dangerous. Use caution to avoid personal injury. Certain power tools may be facilitate cutting.
- For this one you will need the template.
- Cut on the lines. knock out the plug and insert the fixture.
Other models:
on-target bullseye door
on-target disc shooter hoop track
The box:
- 3-7mm thick is good.
- Less than 3mm you may need to place the templates in the back to make the space behind the clips closer.
Don't Forget Night Mode
Put a flashlight in the box and enjoy illuminated target