4½ (Four and a Half) - Steven Wilson Album Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
💿 🎵 Easy-to-print, part of a collection representing British musician Steven Wilson's discography. No supports. 🎸⬜
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
4 1⁄2
All of this can be read
In my book of regrets
I love Steven Wilson's music, and so I created a set of 3D printable abstractions to represent his discography.
This can be used as a beverage coaster, or just for display. It is square like a CD or vinyl album sleeve.
4 1⁄2 (Four and a Half) is an EP released in 2016 with only 6 tracks that serves as an interim release between Wilson's fourth solo album Hand. Cannot. Erase. and his fifth full-length studio album To the Bone.
I avoided the actual album cover as a lithophane or MMU-only photo. Instead, I simplified it into something friendly for FDM regular setups, inspired by album art and tour merch.
My design uses the already simple, flat grey color with four and a half slits that let anything behind or underneath to be seen.
If you like Steven Wilson's work, don't miss my other album covers.
--------Print instructions----------
Any speed is ok for this one, since it has a very simple and geometric design. Input shaper ok.
Infill at least 15% to hold top layers or text above, but you can play with patterns and higher percentages.
I didn't use brims or rafts, but you can if you experience warping, especially in the square corners. Temporary water-based adhesive is useful too.
- No supports
- Scale to whatever size is convenient for you. If the height is too deep you can scale it down in the Z axis
- Feel free to experiment with colors and top fill patterns
- Adaptive layers can help speed up through just square parts, and then have more resolution on text above.
I printed the one you see in my photos with Amolen concrete grey PLA in full top layers of monotonic lines pattern.
Modeled by Mexican designer Dany Sánchez, creator of MiniWorld3D & OpenFigure3D.
Follow me on Instagram!
Any Related Indicia are Trademarks of their respective owners. This model is a non for profit, fan work modeled from scratch inspired by album art. No trademark infringement is intended.