Lithopane Lamp with Lithopanes and Storage Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more.
- Ocena
- 4,5 / 5
- Polubienia
- 56
- Pobrania
- 318
- Wydruki
- 1
- Wyświetlenia
- 1727
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more.
To fit this lamp, lithopanes should be printed at 12cm x 12cm, with a thickness of less than 3mm, but I recommend 2.4 or 2.6mm.
The storage base can store about 8 lithopanes. The lamp can be printed without the base, if it's not needed or wanted.
You will need a light to put in the lamp. I do not recommend candles. Try an LED light. :)
I had success printing these without supports. I did a 10% infill. Lithopanes are with 100% infill and recommend white PLA.