Lithopane Lamp with Lithopanes and Storage Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more.
- Rating
- 4.5 / 5
- Likes
- 56
- Downloads
- 318
- Makes
- 1
- Views
- 1,727
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
This is a simple Lithopane Lamp with a few sample lithopanes, and a base that can store more.
To fit this lamp, lithopanes should be printed at 12cm x 12cm, with a thickness of less than 3mm, but I recommend 2.4 or 2.6mm.
The storage base can store about 8 lithopanes. The lamp can be printed without the base, if it's not needed or wanted.
You will need a light to put in the lamp. I do not recommend candles. Try an LED light. :)
I had success printing these without supports. I did a 10% infill. Lithopanes are with 100% infill and recommend white PLA.