20x20 adjustable bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable bracket to mount a bearing tensioner.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
When adding a dual z-axis upgrade, I needed an easy tensioner. I have a series of upgrades with the goal of making them as cheap as possible.
I designed this to go with the beating pulley linked below, but can be used with a number of others. The height is made to go with the z-axis stabilizers (also linked below) with the printed 48 tooth pulley. I designed it so it would clip in place, so mounting upside down is also possible. This puts the tension pulley 6mm above the gantry.
Bearing pulley: https://www.printables.com/model/617934-gt2-idler-pulley-using-608-bearing/files
Stabilizer (I mirrored this for the right side): https://www.printables.com/model/187674-ender-3-z-axis-bearing-stabilizer
48 tooth pulley: https://www.thingiverse.com/thing:3330894