1 / 4
Multiboard - Bags roll dispenser (Many sizes supported)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A multi-board compatible plastic bag dispenser with adjustable width and selectable diameter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (40)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (43)Powiązane
A multiboard-compatible plastic bag roll holder which supports many roll sizes and any roll width.
The holder is designed so that the left and right part can be mounted as close or as far as you need (thanks to the many mounting holes) depending on the length/width of the roll.
How to choose the right model:
- Measure your roll diameter (example 57mm)
- Download the bag holder file with a larger diameter (example 60mm)
- NOTE: Download the model WITH holes or use the one without if you want an alternative mounting system.
- Print the holder (both left and right parts)
- Mount the holder, spacing the two parts depending on how wide the roll is.
- NOTE: You only need 2 mounting points per side to make it stable, the reason for the many holes is just to provide flexibility for positioning and fine-tuning the roll width.
How to mount:
You can mount the holder by using a few M3 bolts and nuts with the official multi-board Drop-In Nut Snap / multiboard.io/snaps
Print notes:
Print with 3-4 layers to make it strong, the walls are small enough.