Wire organizers for 10x11mm chains Voron 2.4r2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this pieces to help me organize all the wires inside the chains. They are meant to be used at the end of the chai
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this pieces to help me organize all the wires inside the chains. They are meant to be used at the end of the chain. I put some electrical tale around it to prevent the wires from coming out and to prevent it from sliding inside the chain. You may chose not to do that, or you may want to modify the piece yourself. I included the f3d file too. I used the shorter one and slid it from the longer one all the way to the end of the chain. This helped me keeping them strainght.
The wires I used were PTFE covered:
- 4x 20AWG for the extruder motor
- 2x 18AWG for the heater element
- 28AWG for the rest of them. You may want to use thicker ones