1 / 1
Wire organizers for 10x11mm chains Voron 2.4r2 — image 1

Wire organizers for 10x11mm chains Voron 2.4r2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I made this pieces to help me organize all the wires inside the chains. They are meant to be used at the end of the chai

Rating
0 / 5
Likes
5
Downloads
24
Makes
0
Views
436
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I made this pieces to help me organize all the wires inside the chains. They are meant to be used at the end of the chain. I put some electrical tale around it to prevent the wires from coming out and to prevent it from sliding inside the chain. You may chose not to do that, or you may want to modify the piece yourself. I included the f3d file too. I used the shorter one and slid it from the longer one all the way to the end of the chain. This helped me keeping them strainght.

 

The wires I used were PTFE covered:
 

  • 4x 20AWG for the extruder motor
  • 2x 18AWG for the heater element
  • 28AWG for the rest of them. You may want to use thicker ones

Tags