1 / 5
Nat20 Keycap - DnD - Cherry MX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My first sharable design. For all the DnD nerds (like me). Made in Tinkercad.
Keycap fits Cherry MX switches. This one now lives on my escape key.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12
Infill:
20%
Filament: Generic PLA Black
Notes:
Tolerances on the connection to the switch are VERY tight, so make sure your printer's settings are dialed in for best results.
I printed with rafts (not necessary) because I found it was easier to remove from my printer. It can probably be printed without supports, but I have had wonderful results with tree supports autogenerated in the Cura slicer.It can be printed at a lower resolution like 0.2 with good results, but for best result 0.12 looks GREAT.
Category: 3D Printing