3" Anycubic Photon Rear Exhaust Port
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this 3" exhaust port adapter so I could hook up the photon to my existing exhaust fan and vent out doors. The 3"…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made this 3" exhaust port adapter so I could hook up the photon to my existing exhaust fan and vent out doors.
The 3" front lip needs support but that's the only part that does. So if you cant do custom supports I recommend you set your support threshold to ~35deg so you don't needlessly print (and have to remove) extraneous supports.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%
Filament: MakerGeeks Raptor PLA black
Notes:
Tune your supports so only the front lip is supported since the rest doesn't need it. If you can't do custom supports than ~35deg should do it.
Category: 3D Printer Parts