1 / 4
Batman Utility Belt (1991 Buckle and Pods) — zdjęcie 1
1 / 4

Batman Utility Belt (1991 Buckle and Pods)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a quick buckle and pods for my kids Halloween costumes, these were modeled in Fusion 360 with reference photos…

Ocena
0 / 5
Polubienia
23
Pobrania
152
Wydruki
0
Wyświetlenia
719
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a quick buckle and pods for my kids Halloween costumes, these were modeled in Fusion 360 with reference photos from the 1991 Batman (Keaton) films. probably not exact but pretty close. link to Fusion 360 files is here http://a360.co/2yK8uEL

Print Settings

Printer:

Anet A8

Rafts:

Yes

Supports:

No

Resolution:

.1mm

Infill:

50%


Notes:

the belt was just made from felt and these where hot glued directly to the surface

Post-Printing =============

painting

if you paint this i HIGHLY recommend airbrushing in an automotive gap filling primer into the small crevices and following up with the good airbrush or hand painting, rattle canning these will get too much build up on the surface before you get enough coverage down in the narrow channels

Category: Costume

Tagi