Hueforge - 5 colors - sexy vampire girl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first try making a print with hueforge. The origin was a wallpaper from dusk till dawn.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 1270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
My first try making a print with hueforge. i used 5 colors of mixed filaments.
The origin was a wallpaper from dusk till dawn show.
The printing took near 10 hours because i set the speed to 100 mm/s because of the Esun filament.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Esun Brown Transmission Distance: 1.5
PLA Qidi Rapido Red Transmission Distance: 5
PLA Qidi Rapido Yellow Transmission Distance: 6
PLA Qidi White - Matte Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Brown
At layer #17 (1.44mm) swap to Red
At layer #22 (1.84mm) swap to Yellow
At layer #28 (2.32mm) swap to White - Matte for the rest.