Hueforge - 5 colors - sexy vampire girl
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My first try making a print with hueforge. The origin was a wallpaper from dusk till dawn.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 102
- Makes
- 0
- Views
- 1,273
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
My first try making a print with hueforge. i used 5 colors of mixed filaments.
The origin was a wallpaper from dusk till dawn show.
The printing took near 10 hours because i set the speed to 100 mm/s because of the Esun filament.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ Esun Brown Transmission Distance: 1.5
PLA Qidi Rapido Red Transmission Distance: 5
PLA Qidi Rapido Yellow Transmission Distance: 6
PLA Qidi White - Matte Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Brown
At layer #17 (1.44mm) swap to Red
At layer #22 (1.84mm) swap to Yellow
At layer #28 (2.32mm) swap to White - Matte for the rest.