1 / 3
Tool Free SSD 2.5" to 3.5" Drive Bay Adapter For SATA to IDE Converter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool Free SSD 2.5" to 3.5" Drive Bay Adapter For SATA to IDE Converter
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
This is a tool free way for you to use SSD's in your retro computing project with popular SATA to IDE adapter boards.
The problem with these is that they don't usually mount to anything, and flap around in the breeze. This adds some security by clipping the rear of the board onto the drive.
When you are ready to take the drive out for experimenting, just remove the IDE adapter board and slide the drive out!
Print flat on its botton at .2mm layer height. preferably using PETG, no support!