Bath Tub Faucet Elephant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bathtub faucet cover which allows water to come out of its trunk.
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 1844
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Used Lumalabs.ai to create the base model of the elephant, I then hollowed out the model and trimmed the inside to fit our bath faucet. Disclaimer model may not work with your faucet, I highly recommend throwing the model in your favorite cad software and making a rough model of your faucet to see if it will fit and scale the model as needed.
I printed the spout model in PLA with 15% gyroid infill. Model is orientated and has built in supports for overhangs so slicer support is not needed, I still recommend having bridge settings enabled.
Printed the eye model which acts as a strap to hold it to the faucet in TPU with 15% gyroid infill. Gcode included is for a microswiss direct drive ender 3. It should also work with new Ender 3 V3 models.