Sun Catchers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
frame to make DIY sun catchers with resin!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2 designs of sun catchers. The sizes are both 11" x 7" x 0.125". Each sun catcher was cut in half to fit on the build plate, so will have to glue them back together.
To make the sun catcher, I am using a clear acryilic plate as the base to then put clear resin on as the glue to put the frames together. Once cured, you can then start mixing colored resin and put it in the spot you desire!!
Infill is set at 100% to make sure frame doesn't snap, but can always change it to what you want.
If print is failing try adding a brim or have external perimeter print first (this fixed my issues with it).