AirGradient DIY Pro HSW Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your AirGradient DIY Pro on your Honeycomb storage wall
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 336
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
AirGradient is a great open source air quality monitor, and I keep one next to my 3d printer. Rather than stick it directly to my wall, I remixed Handro's desk stand (thanks for using Onshape and making it even easier!) with my HSW inserts.
You will need to include some sort of supports to print the hooks. I also recommend an infill enforcer to increase the strength of the hooks themselves. To that end, I've provided a 3mf file with these modifications, which you can load into PrusaSlicer (you should be able to load it as a model, not a full project).
If you need to modify this, you can copy the source at Onshape.