AirGradient DIY Pro HSW Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your AirGradient DIY Pro on your Honeycomb storage wall
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 1
- Views
- 336
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
AirGradient is a great open source air quality monitor, and I keep one next to my 3d printer. Rather than stick it directly to my wall, I remixed Handro's desk stand (thanks for using Onshape and making it even easier!) with my HSW inserts.
You will need to include some sort of supports to print the hooks. I also recommend an infill enforcer to increase the strength of the hooks themselves. To that end, I've provided a 3mf file with these modifications, which you can load into PrusaSlicer (you should be able to load it as a model, not a full project).
If you need to modify this, you can copy the source at Onshape.