Bosch dishwasher waterpocket screw wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool for untightening the plastic screws in the washing cell for removing and cleaning the water pocket.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 509
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
My Bosch Dishwasher started smelling badly. All cleaning with chemicals did not work. The water in the swamp was not pumped properly and repeatedly became foul.
After opening the outer side lid I saw that there is some nasty colorful mold sitting in the water pocket. After watching some Youtube videos this video in the video says that there is floating switch located.
The follwowing video explains how to disassemble the water pocket:
When I tried to disassemble the water pocket, I had the problem, that the screw was very tight.
For opening the screw I downloaded and printed this tool: https://www.thingiverse.com/thing:1948081 Unfortunately the tool has no lever and I did not get the screw lose.
Therefore I designed the attached tool with a long arm for applying more force to the screw. I also added a hexagon for the water inlet screw.
2024-02-18 Update: The screw was so tight that the tool broke.
I now designed the V2 version. With a 30cm wrench I was now able to losen the screw.
Because my first tool broke I printed V2 very robust. I printed the middle section, where the teeth are attached, full solid (see Prusa project file)