Filament Guide Mouting Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you frequently remove the Filament Guide, you may find this improvement useful.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Remix of original Prusa model the Filament Guide.
The Filament Guide is a very useful new feature, but sometimes I have to take it off. So that I don't have to keep looking for the hex key, I made this tweak for manual control.
Print instructions:
- Material: PETG
- Layer: 0,2 mm
- Perimeters: 2
- Infill: 15%
- Supports: No
- Brim: No
This model does not require any special settings, more details in the attached 3MF file.
Part list:
- Printed part [x1]
- Bolt M3x25 HEX (DIN 912) [x1]
Assembly instructions:
It is necessary to replace the original M3x18 screw with M3x25.
First degrease the screw. Insert the threaded shank of the M3x25 screw into the printed head. Before putting the screw head in there, apply some epoxy glue to the hole. Just a small amount is enough.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.
Print visions, create reality!