1 / 2

Filament Guide Mouting Screw

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zbyněk Král

@ZbynekKral

If you frequently remove the Filament Guide, you may find this improvement useful.

Rating: 0 / 5
Likes: 0
Downloads: 22
Makes: 0
Views: 214
Reviews: 0

Updated at source: Sep 9, 2024

Model information

Source: Printables
Category: Prusa Parts & Upgrades
License: GNU General Public License v2.0

Details Files (3)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (5)

Remix of original Prusa model the Filament Guide.

The Filament Guide is a very useful new feature, but sometimes I have to take it off. So that I don't have to keep looking for the hex key, I made this tweak for manual control.

Print instructions:

Material: PETG
Layer: 0,2 mm
Perimeters: 2
Infill: 15%
Supports: No
Brim: No

This model does not require any special settings, more details in the attached 3MF file.

Part list:

Printed part [x1]
Bolt M3x25 HEX (DIN 912) [x1]

Assembly instructions:

It is necessary to replace the original M3x18 screw with M3x25.

First degrease the screw. Insert the threaded shank of the M3x25 screw into the printed head. Before putting the screw head in there, apply some epoxy glue to the hole. Just a small amount is enough.

Custom modification:

If you want to modify the model, I am attaching the STEP file and a link to my OnShape.

OnShape Link

Note:

Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.