Counting matching models…
This is just a plate which can be fitted to the original clamp and used with your VKB devices. Tested on NXT Gladiator with and without Omni stick. The plate has groves of 1.5mm which you can use to attach to the clamp using few cable…
Inspired by the Traxxas CLIPLESS BODY MOUNTING on the Rustler VXL, I've made this one for the e-revo VXL 1/16. I used two screws M3x0.5 6mm (recycled on a old revo 3.3, sold with this part TRX5228) Works perfectly
Hi, Finally something I can contribute! Maybe someone recognises the following situation: You want to play you favorite PS5 but the TV is occupied by our significant other. Luckily you have a nice PC monitor on an arm that you can hookup…
Design is print in place and is working with all lenghts of översidan
Print without supports It helps immensely to remove the bars in front of the fans for better air flow. See photos.
I got a 3D printer last week and decided today to make my first 3d printable model. It is the back mounting plate with and without screw holes (it might be hard to print the tighter part of the screw holes so second version can be…
[ENG] Hi everyone, Thanks to @MoreSideways, I got into drifting in Assetto Corsa. Unfortunately, the narrow desk surface combined with its slippery finish makes it so that the steering wheel can shift during more intense movements, even…
This model is shaped specifically for my handle, which is a noname low-end one. The 195mm size is however standardized (at least in Europe). Remix the model preserving the screw holes and front plate position, adjust the back for your…
This is a universal hanging mounting bracket for the Planet Audio P350MB, and very likely fits additional 1-DIN head units that share the same retaining ring clip mounts on the sides. I designed this to be able to mount a 12v car radio…
.4 grams each! Works great for under cabinet/desk mounting 8mm LED strips. Simply screw in to desired location and clip strip in.
My glove box hinge mount broke, here is a replacement part that can be epoxied in place. There must be some of the original tab left to mount this to. In the above photo part of the original tab sits behind the printed part. The stand…
Print on its side. No support needed. Fix with double-sided tape, like the official mount. Update 2024-04: replaced with a screw-attached one because the sun heated my door and the double-sided tape glue melted. Take a look at my 3D models.
Model of a backplate for a Sanoui K11 - 125 Lathechuck on a HBM Norton Profi Lathe. Purpose is to check the fit on the spindle nose and to fabricate a fitting mounting plate out of cast iron and to find out the short taper dimensions. It…
Attached file consists of a mouting bracket with the following parameters: #1 length 200 mm #2 height 200 mm #3 width 50 mm #4 thickness 5 mm #5 hole diameter 6 mm #6 chamfer on the holes yes 👉 Generate another one adapted to your needs!…
I wanted to mount the Multiple Mechanism Auto-Rewind Spool Holder on an Ikea Skadis pegboard I already had mounted behind my 3d printer so I came up with these brackets. The brackets snap-in the holes on the bottom of the spool holder…
Hey guys, I always wanted to have the opportunity to mount some 30x30 PCB in the back of the TBS Source One Frame. Unforturnately there are no mounting holes. Because of this, I tried to design these bracket mounts. They are designed to…
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
Create a 90 degree mountable style of bracket for T5 rail connector LED bar light under your cabinet! PETG 15% infill
This is a low-profile, high-rigidity under-desk mounting bracket designed for a standard HDMI splitter. It features an open-back and open-front layout to allow seamless HDMI and power cable routing without restriction. The inner cavity…
I was afraid, that my baby gets too cold, since the maximum angle of our reer lamp is to high, so i added additional 15 ° of angle so my baby doesnt get cold feed during a diaper change :)
Just a mounting hook, as you can see on the pictures.
Vyvýšený držík na standartní puškohled o průměru 25 mm a drážku 21,5 mm
Extended the PSU mounting brackets to accommodate my be.quiet! Pure Power PSU. Should fit any PSU with a length of 160mm
I wanted to mount a hard drive under this https://www.thingiverse.com/thing:922740 raspberry for my MotionEye Security Camera. this way you can use 4 scrows to mount under the raspberry Category: Computer
Remix of original Prusa model the Filament Guide . The Filament Guide is a very useful new feature, but sometimes I have to take it off. So that I don't have to keep looking for the hex key, I made this tweak for manual control. Print…
I modified this from the original metal bracket to use it in my filament from PET bottle machine.
