1 / 2
Sturdy SKÅDIS IVAR mounts — zdjęcie 1
1 / 2

Sturdy SKÅDIS IVAR mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts to fix a SKÅDIS pegboard to the side of an 50 cm IVAR shelf

Ocena
5 / 5
Polubienia
50
Pobrania
137
Wydruki
1
Wyświetlenia
1015
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These mounts allow you to fix a SKÅDIS pegboard to the side of a 50 cm IVAR shelf (Ikea). 

Specifically, they will attach a small SKÅDIS (36x56 cm) to two 54.5 cm apart horizontal IVAR side boards. On my 226 cm tall IVAR, that's the 3rd and 4th side board, counting from the bottom. Make sure your sideboards have the right distance before printing!

While there are a few mounts for this purpose out there, I couldn't find one that secured the SKÅDIS on both its top and bottom. I also wanted to reuse the original SKÅDIS mounting screws to preserve its aesthetic, so these mounts have printed holes that these screws can bite into.

To assemble everything, first hook the mounts onto the side boards, then screw the SKÅDIS onto them using the mounting screws that came with it. After checking that the position is right, clamp down the mounts using an M3 screw each and the spacer blocks.

The clamping part is modelled after the awesome IKEA Ivar Rack Clothes Hanger by @UkoTerpuh – check out their page for detailed clamping instructions.

 

Tagi