Replacement of the Ender 3 S1/Pro/Plus Sprite Extruder hotend fan with a 5015 blower fan, including NUTS for secure installation Compatible with CHCB-OT Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the Ender Sprite Extruder Hotend fan with a 5015 blower, suitable for the Ender 3 S1 and similar models.
- Ocena
- 0 / 5
- Polubienia
- 55
- Pobrania
- 308
- Wydruki
- 0
- Wyświetlenia
- 2821
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower, I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the bracket for the CR Touch, this to be able to mount the layer ventilation system that I am designing and will soon upload to the platform.
Note: Compatible with CHCB-OT Hotend
I also changed the screw coupling on the fan bracket to use the hex socket cap head screws M3x5 you will need 5.
For this, you will need:
- 2 M3x20 mm screws
- 2 M3 nuts
- 2 M3 washers
- 2 M2.5x12 mm screws (You can use the factory ones)
- 2 M2.5 nuts
How to print:
- PETG
- Layer height 0.2 mm or less
- Infill 20% or more
- Supports Yes
When you move the CR Touch, you should adjust the x-offset.
This value works for me:
x_offset: -34.0
With KLIPPER
You can modify the offset in the "printer.cfg" file:
[bltouch]
x_offset: -34.0