1 / 2
Replacement of the Ender 3 S1/Pro/Plus Sprite Extruder hotend fan with a 5015 blower fan, including NUTS for secure installation Compatible with CHCB-OT Hotend — image 1
1 / 2

Replacement of the Ender 3 S1/Pro/Plus Sprite Extruder hotend fan with a 5015 blower fan, including NUTS for secure installation Compatible with CHCB-OT Hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replace the Ender Sprite Extruder Hotend fan with a 5015 blower, suitable for the Ender 3 S1 and similar models.

Rating
0 / 5
Likes
55
Downloads
308
Makes
0
Views
2,821
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

In this remix of the Ender 3 Sprite Extruder hot end fan replacement with a 5015 blower, I made several modifications, added M2.5 nuts for the extruder backplate, and M3 nuts for the fan bracket. I made a small modification to the bracket for the CR Touch, this to be able to mount the layer ventilation system that I am designing and will soon upload to the platform.

Note: Compatible with CHCB-OT Hotend

I also changed the screw coupling on the fan bracket to use the hex socket cap head screws M3x5 you will need 5.

For this, you will need:

  • 2 M3x20 mm screws
  • 2 M3 nuts
  • 2 M3 washers
  • 2 M2.5x12 mm screws (You can use the factory ones)
  • 2 M2.5 nuts

How to print:

  • PETG 
  • Layer height 0.2 mm or less
  • Infill 20% or more
  • Supports Yes

 

When you move the CR Touch, you should adjust the x-offset. 

 This value works for me:

x_offset: -34.0

 

With KLIPPER

You can modify the offset in the "printer.cfg" file:

[bltouch]

x_offset: -34.0