1 / 1
P1 Monitor RPI Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 part enclosure for raspberry pi 3 or 4 (only the center bit is different) with different tops
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
3 part enclosure for raspberry pi 3 or 4 (only the center bit is different) with different tops
Requires some countersunk torx M2.5 fasteners (WS 9475).
M2.5x16 for the top, and for the bottom at least M2.5x12 up to M2.5x16.
Includes tops:
- P1Monitor logo (see ztatz.nl)
- P1Monitor hat (see https://github.com/Jeroen6/p1hat)
- Blank
- Octoprint logo
I suggest PETG for the threading of the M2.5 into the plastic to work well. No threaded inserts or taps required, just let the m2.5 thread in. Should be sufficient for a raspberry pi.
Fusion360 files included, good luck.