Mountain Bike Handle Bar Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Expanding plug for a mountain bike handle bar.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 520
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Total overkill, but why not…
I printed this with PLA.
Hardware is a M5x30 hex screw, with M5 nut. Might be able to get away with M5x25, but I didn't have any. The plug is to fit a handle bar with a 19mm ID.
I printed the “Bottom” or inside plug with the oval face down on the print bed. Since this is the part that slides on wedge of the “top” or outer plug I figured this would give the best finish.
I used supports for the bolt head recess on the “top”, but I forgot to add them on one of my test parts and it came out fine, so you can probably get away without supports.