Pushing for wheelbarrow fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm).…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm).
So I whipped up a bushing which fits the new tires to the wheelbarrow.
80% infill to the middle section and 20% rest. What is "middle" you ask? I just put some 50% of the middle section with 80% fill to make it a bit stronger.
Lets see how well it holds up. Should be ok as new wheel has real bearings unlike the old ones.
Material is PLA.
Category: Outdoor & Garden