1 / 9
Pushing for wheelbarrow fitting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm).…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Wheel barrow had a axle of 16mm. New wheels have 20mm hole. Also new wheels are narrower (73mm) than old ones (95mm).
So I whipped up a bushing which fits the new tires to the wheelbarrow.
80% infill to the middle section and 20% rest. What is "middle" you ask? I just put some 50% of the middle section with 80% fill to make it a bit stronger.
Lets see how well it holds up. Should be ok as new wheel has real bearings unlike the old ones.
Material is PLA.
Category: Outdoor & Garden