SCX10.2 to RC4WD Xtra Cab body mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some side trays you can print to mount the RC4WD Xtra Cab Body on an SCX10.2.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 2070
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey everyone,
Here's some side trays/body mounts to install a RC4WD Xtra Cab body onto an Axial SCX10.2 chassis. Just slide some basic M3 nuts into the slots and you're ready to drop the body on. (You can either run the bolts like studs or bolt it on every time you take it out) I would suggest a rear mount, the stress can end up breaking the rocker section of the body. I printed these with the chassis side facing the build plate(supports up to the body side) and didn't have any issues. Ran these for months before I upgraded to some metal side trays I also designed. Hope these work out for you, have fun and happy crawling!
Xtra Cab Body Set: https://store.rc4wd.com/rc4wd-1987-toyota-xtracab-hard-body-complete-set.html
