Prusa Enclosure Hinged Lid Hook / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook / Holder for the Original Prusa Enclosure when using the hinged lid mod
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the Original Prusa Enclosure with the hinged lid mod needs quite some space in regards of height when you want to open the lid, there's most likely a shelve or something above that might prevent you from fully opening it and more importantly keeping it open.
I made a simple hook that fits between the handle and therefore can easily be attached and taken off again and secures the open lid in place.
This model is made for 18.5mm thick shelves but I uploaded the step file as well so people can modify the gap to their needs.
Printed in Prusament PLA
0.2mm structural IS
4 perimeter
10 bottom / 10 top layers
15% Gyroid infill