Prusa Enclosure Hinged Lid Hook / Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.34 – €1.64 net (excluding VAT)
For file: Hinged Lid Hook_0.4n_0.2mm_PLA_MK4IS_1h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.49 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 1.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hook / Holder for the Original Prusa Enclosure when using the hinged lid mod
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Since the Original Prusa Enclosure with the hinged lid mod needs quite some space in regards of height when you want to open the lid, there's most likely a shelve or something above that might prevent you from fully opening it and more importantly keeping it open.
I made a simple hook that fits between the handle and therefore can easily be attached and taken off again and secures the open lid in place.
This model is made for 18.5mm thick shelves but I uploaded the step file as well so people can modify the gap to their needs.
Printed in Prusament PLA
0.2mm structural IS
4 perimeter
10 bottom / 10 top layers
15% Gyroid infill