1 / 2
Piggy Bank - Safe Money Bank / Tirelire - Coffre-fort — zdjęcie 1
1 / 2

Piggy Bank - Safe Money Bank / Tirelire - Coffre-fort

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Piggy bank very difficult to open, so only in emergencies / Tirelire difficile à ouvrir donc seulement en cas d'urgence

Ocena
5 / 5
Polubienia
33
Pobrania
178
Wydruki
0
Wyświetlenia
1500
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank.

My contribution is just to have modified the model to add a slot on one side.

So there are 6 different STL files and 2 different 3MF files :
. Dovetail_Cube_Side1 2 3 4 6 (same model)
. Dovetail_Cube_Slot 5 (with slot)

The 2 3MF files each contain 3 faces and include all the parameters for a 3-tool Prusa XL (minimum).

You can therefore print the 6 sides separately or in 2 batches of 3 sides, depending on whether or not you have a multi-color printer.

No support required.

You'll find that it's not easy to fit the sides together, but you can do it by spreading the sides slightly and forcing a bit. It's the principle of having a piggy bank that's hard to open.

Of course, I'd like to thank Andrew J. Bean, the author of the original design. The dovetail principle is very simple, but I have no doubt that he had to make several attempts to find the optimum tolerance.  --------------------------------------------------------------------------------------------------------

Suite à la publication d'une boite multicouleurs quasiment impossible à réouvrir, j'ai eu l'idée d'en faire une tirelire.

Ma contribution est juste d'avoir modifié le modèle pour y ajouter une fente sur une face.

Il y a donc 6 fichiers STL et 2 fichiers 3MF différents :
. Dovetail_Cube_Side1 2 3 4 6 (tous identiques)
. Dovetail_Cube_Slot 5 (avec une fente)

Les 2 fichiers 3MF reprennent 3 faces chacun et incluent tous les paramètres pour une Prusa XL à 3 outils (minimum).

Vous pouvez donc imprimer les 6 faces séparément ou en 2 lots de 3 faces selon que vous ayez une imprimante multi-couleurs ou pas.

Aucun support nécessaire.

Vous verrez qu'il n'est pas facile d'emboîter les côtés l'un dans l'autre, mais on y arrive en écartant légèrement les côtés et en forçant un peu, on y arrive. C'est le principe, avoir une tirelire difficile à ouvrir.

Bien sûr je tiens à remercier Andrew J. Bean, l'auteur du modèle initial. Le principe de la queue d'aronde est très simple, mais je ne doute pas qu'il a du faire plusieurs essais pour trouver la tolérance optimale.  

Tagi