1 / 2
Piggy Bank - Safe Money Bank / Tirelire - Coffre-fort — image 1
1 / 2

Piggy Bank - Safe Money Bank / Tirelire - Coffre-fort

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Piggy bank very difficult to open, so only in emergencies / Tirelire difficile à ouvrir donc seulement en cas d'urgence

Rating
5 / 5
Likes
33
Downloads
178
Makes
0
Views
1,503
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Following the publication of a multi-colored box that was almost impossible to reopen, I had the idea of turning it into a piggy bank.

My contribution is just to have modified the model to add a slot on one side.

So there are 6 different STL files and 2 different 3MF files :
. Dovetail_Cube_Side1 2 3 4 6 (same model)
. Dovetail_Cube_Slot 5 (with slot)

The 2 3MF files each contain 3 faces and include all the parameters for a 3-tool Prusa XL (minimum).

You can therefore print the 6 sides separately or in 2 batches of 3 sides, depending on whether or not you have a multi-color printer.

No support required.

You'll find that it's not easy to fit the sides together, but you can do it by spreading the sides slightly and forcing a bit. It's the principle of having a piggy bank that's hard to open.

Of course, I'd like to thank Andrew J. Bean, the author of the original design. The dovetail principle is very simple, but I have no doubt that he had to make several attempts to find the optimum tolerance.  --------------------------------------------------------------------------------------------------------

Suite à la publication d'une boite multicouleurs quasiment impossible à réouvrir, j'ai eu l'idée d'en faire une tirelire.

Ma contribution est juste d'avoir modifié le modèle pour y ajouter une fente sur une face.

Il y a donc 6 fichiers STL et 2 fichiers 3MF différents :
. Dovetail_Cube_Side1 2 3 4 6 (tous identiques)
. Dovetail_Cube_Slot 5 (avec une fente)

Les 2 fichiers 3MF reprennent 3 faces chacun et incluent tous les paramètres pour une Prusa XL à 3 outils (minimum).

Vous pouvez donc imprimer les 6 faces séparément ou en 2 lots de 3 faces selon que vous ayez une imprimante multi-couleurs ou pas.

Aucun support nécessaire.

Vous verrez qu'il n'est pas facile d'emboîter les côtés l'un dans l'autre, mais on y arrive en écartant légèrement les côtés et en forçant un peu, on y arrive. C'est le principe, avoir une tirelire difficile à ouvrir.

Bien sûr je tiens à remercier Andrew J. Bean, l'auteur du modèle initial. Le principe de la queue d'aronde est très simple, mais je ne doute pas qu'il a du faire plusieurs essais pour trouver la tolérance optimale.  

Tags