Ikea Samla 22L - Drybox silica tray for ThomaS Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica tray for easier removal of silica gel from the drybox
- Ocena
- 4,75 / 5
- Polubienia
- 16
- Pobrania
- 87
- Wydruki
- 4
- Wyświetlenia
- 655
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
When I had to take the silica out to dry, part of it was always stuck under the seal. So I designed a tray to make it easier to handle the silica.
At first I planned a more robust one, but I was reluctant to use so much filament on it, so I made it lighter. I uploaded the tray with 2mm wall thickness if you want it to be stronger.
I also uploaded versions with added mouse ears.
Edit:
The lid is uploaded separately as a .3mf file because it was an afterthought, you need to fill the lid with silica, put the tray on top, and then turn it over to put it back into the Samla box.
The .3mf is a pre-configured project file, but you can easily change the infill to your liking, if you import the model only just simply remove the top and bottom layers and select the infil you like.