Snap-fit Cufflinks - Superman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Superman logo cufflinks. Easy to print and snaps tightly together. !!! Now with a multi-material version !!! The…
- Ocena
- 4,333 / 5
- Polubienia
- 56
- Pobrania
- 343
- Wydruki
- 3
- Wyświetlenia
- 1569
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Superman logo cufflinks.
Easy to print and snaps tightly together.
!!! Now with a multi-material version !!!
The cufflinks hinge is inspired by the Star Wars Cufflinks by belch: https://www.thingiverse.com/thing:104758
I needed superman cufflinks and could not see a good way of printing them on a 3D printer without sacrificing the curved surface of the logo.
After some redesigning i came up with the 2 part snap-fit design.
There are 2 files needed to print a single cufflink.
- The Cufflink_Pins.stl is the part that goes into the shirt - the hinge printed in place.
- The Cufflink_Head_XXXX.stl is the head of the cufflink (Pick the one you desire)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Doesn't Matter
Supports:
Doesn't Matter
0,12
Infill:
30
Filament:
Spectrum PLA Shiny Black
Notes:
All files should be turned in the direction ready for printing.
After printing you might need to go over the piece removing unwanted material from the print bed - ensuring the pieces fits together.If the hinge does not rotate - use a knife to cut between the pins and the hinge without going too deep.
Use brim if the corners bend up.
Category: Accessories