Snap-fit Cufflinks - Superman
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Superman logo cufflinks. Easy to print and snaps tightly together. !!! Now with a multi-material version !!! The…
- Rating
- 4.333 / 5
- Likes
- 56
- Downloads
- 343
- Makes
- 3
- Views
- 1,569
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Superman logo cufflinks.
Easy to print and snaps tightly together.
!!! Now with a multi-material version !!!
The cufflinks hinge is inspired by the Star Wars Cufflinks by belch: https://www.thingiverse.com/thing:104758
I needed superman cufflinks and could not see a good way of printing them on a 3D printer without sacrificing the curved surface of the logo.
After some redesigning i came up with the 2 part snap-fit design.
There are 2 files needed to print a single cufflink.
- The Cufflink_Pins.stl is the part that goes into the shirt - the hinge printed in place.
- The Cufflink_Head_XXXX.stl is the head of the cufflink (Pick the one you desire)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Doesn't Matter
Supports:
Doesn't Matter
0,12
Infill:
30
Filament:
Spectrum PLA Shiny Black
Notes:
All files should be turned in the direction ready for printing.
After printing you might need to go over the piece removing unwanted material from the print bed - ensuring the pieces fits together.If the hinge does not rotate - use a knife to cut between the pins and the hinge without going too deep.
Use brim if the corners bend up.
Category: Accessories